| Customization: | Available |
|---|---|
| Additional Capabilities: | Coating, Drying, Granulating, Milling, Vacuum |
| After-sales Service: | Online Support, video Technical Support |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | Total (liter) |
Useful (liter) |
kW (*) | RPM (*) | H1 (*) (mm) |
L (mm) |
W (mm) |
H (mm) |
Weight (kg) |
| PTP-5L | 5 | 3 | 1.1 | 365 | 320 | 900 | 400 | 600 | 110 |
| PTP-10L | 10 | 7 | 1.1 | 365 | 300 | 950 | 400 | 600 | 120 |
| PTP-45 | 45 | 30 | 1.1 | 90 | 700 | 940 | 850 | 1,160 | 260 |
| PTP-70 | 70 | 45 | 1.5 | 63 | 620 | 1,150 | 980 | 1,250 | 360 |
| PTP-100 | 100 | 70 | 1.5 | 63 | 620 | 1,300 | 1,000 | 1,280 | 600 |
| PTP-200 | 200 | 140 | 2.2 | 53 | 610 | 1,590 | 1,110 | 1,370 | 700 |
| PTP-300 | 300 | 210 | 3 | 50 | 620 | 1,750 | 1,140 | 1,460 | 800 |
| PTP-500 | 500 | 350 | 4 | 50 | 610 | 1,990 | 1,280 | 1,570 | 1,050 |
| PTP-750 | 750 | 500 | 5.5 | 50 | 610 | 2,247 | 1,370 | 1,670 | 1,240 |
| PTP-1000 | 1,000 | 700 | 7.5 | 35 | 150 | 2,410 | 1,450 | 1,360 | 1,450 |
| PTP-1500 | 1,500 | 1,000 | 11 | 35 | 150 | 2,780 | 1,590 | 1,410 | 1,850 |
| PTP-2000 | 2,000 | 1,400 | 15 | 35 | 180 | 3,020 | 1,700 | 1,550 | 2,550 |
| PTP-3000 | 3,000 | 2,100 | 18.5 | 35 | 180 | 3,285 | 1,860 | 1,780 | 3,100 |
| PTP-4000 | 4,000 | 2,800 | 22 | 30 | 180 | 3,710 | 2,080 | 1,900 | 4,100 |
| PTP-5000 | 5,000 | 3,500 | 30 | 30 | 180 | 3,950 | 2,210 | 2,000 | 4,700 |
| PTP-6000 | 6,000 | 4,200 | 30 | 30 | 180 | 4,110 | 2,260 | 2,100 | 5,100 |
| PTP-8000 | 8,000 | 5,600 | 37 | 27 | 200 | 4,690 | 2,480 | 2,270 | 6,600 |
| PTP-10000 | 10,000 | 7,000 | 45 | 22 | 200 | 5,720 | 2,420 | 2,315 | 9,500 |
| PTP-12000 | 12,000 | 8,400 | 55 | 19 | 525 | 7,685 | 2,640 | 2,735 | 14,200 |
| PTP-15000 | 15,000 | 10,500 | 75 | 19 | 500 | 8,000 | 2,780 | 2,860 | 15,700 |
| PTP-20000 | 20,000 | 14,000 | 90 | 15 | 550 | 8,860 | 3,000 | 3,110 | 23,500 |
| PTP-25000 | 25,000 | 17,500 | 110 | 15 | 550 | 9,900 | 3,100 | 3,210 | 27,800 |
| PTP-30000 | 30,000 | 21,000 | 132 | 13 | 605 | 10,360 | 3,160 | 3,420 | 31,000 |
1. PTP-L: laboratory size
2. kW/rpm are product dependent and might vary.
3. H1 (discharge height) can be designed according to request.
4. All specifications and illustrations are as accurate as is reasonably possible, but they are not binding.
5. PerMix reserves the right to modify the design without notice.
Introduction:
| PerMix PTP series Paddle Mixers are an innovative design derived from the well-known Plow Mixers (or Ploughshare Mixers, Plough Mixers). The Paddle provides the same mixing performance as a Plow but requires much less power consumption. Due to the less rotation speed of the paddles, the wearing of the mixing element for the Paddle is also less than the Plows. Besides, PerMix Paddle Mixers have a better performance dealing with the viscous/sticky materials, such as slurries, which is because the plough-shaped mixing elements tend to be wrapped by the viscous materials while the paddles don't. Compared with the conventional Ribbon Blenders, Paddle Mixers are superior because they are able to mix the material in a more aggressive way while keeping the similar power consumption, due to the fact that the uniquely designed paddles are more pitched than ribbons in a Ribbon Blender and move more materials in a single turn. The main difference between our PTP Paddle Mixer and PTS Plow Mixer is the mixing element: PTS Mixer uses the plough-shaped element, while PTP Mixer uses the paddle element. PerMix PTP Paddle Mixers can be used wherever the Plow Mixers are used, including but not limited to compounding, fine mixing, dispersing, suspending, emulsifying, deaerating, tempering, accelerating chemical or physical reactions, granulating, breaking down agglomerates, etc. Both Paddle and Plow are 'aggressive mixers' that are well qualified for high mixture ratio processes up to 1:1,000,000, which means the single sample of 1 ppm of a batch volume can still have the right mixture of ingredients. |
 |
|
PerMix designs the full range of paddle mixers, including the lab size (5L full) & pilot size (up to 45L full) models for Research & Development purpose. The small size machine is very helpful for customers when the ingredients for R&D are expensive, thus helping our customer to save their limited budget at the first stage. With the good performance of the lab & pilot mixer, it is easy to scale up for a medium size or even bigger one. |
| The installation of PerMix Multi-chopper in the basic PTP powder mixer enables the breaking down of agglomerates during the mixing process. Together with the mixing element, the PerMix Multi-chopper removes lumps in the initial product, chops pasty adhesives and hinders the formation of agglomeration during the moisturizing of powdered substances. The PerMix Multi-chopper is operated independently by its own motor. |
|
|
PerMix can design the mixer to work with interchangeable mixing tool of both paddles and plows, supplying versatility while keeping a relatively low budget for our customer. Both plough (for PTS Mixer) and paddle (for PTP Mixer) have their own advantages: the plough-shaped element shortens the mixing time, and can easily penetrate through the dense and thick powder or paste materials, while the paddle element provides more gentle mixing with less heat generated which is good for temperature sensitive materials. |
| PerMix supplies mixers for continuous work when a large capacity per hour is needed for the same material. Continuous paddle mixers differ from batch paddle mixers in that the mass flow of the product is from the inlet of the container to the discharge at the opposite end. | |
|
Jacketed vessel for heating/cooling operation by steam, thermal oil, or water. ASME/PED certificate can be optional for high pressure operation. |
| Access doors can be designed for easy cleaning, inspection & maintenance. | |
|
Liquid can be added into the powder by spray nozzles on a pipe which is installed on the top of the mixing vessel. The necessary pump and tank can also be provided by PerMix. |
Q: What is your price level compared with European suppliers and local Chinese suppliers?
A: Depending on the machine type and size, our price level is 30%-60% less than the European suppliers and 5-15% higher than the big local suppliers.
Q: Are you able to provide tailor-made design and production for the mixers?
A: Yes, in fact more than half of our mixers are tailor made, which is one of our strong points.
Q: Are you able to design and produce other processing equipment?
A: We are open to discuss about it.
Q: Can you provide machines to OEM customers, meaning to label their brands on the machines.
A: Yes we are doing it a lot. We have several OEM partners in the USA.
Q: Do you have agent network out of China?
A: Yes we do have agents but only in some countries, for example in USA, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are still looking for more agents because we believe to work with agents is the best way to do business.
Q: What is your delivery lead time of the mixing equipment.
A: Depending on the size and level of customization, but usually it is from 6-14 weeks.
Q: How do you pack and ship the mixing machines?
A: For machines don't require full container loading, we will pack them in wooden case. For FCL (full container loading) shipment, we will just wrap the machines in plastic films and fix them in the container. The shipment can be either by air or by sea.
){kind=link}