Quality and Quantity Assured Jet Stream Mixer (PerMix, PJ)
INTRODUCTION:
PerMix PJ series Jet Steam Mixer is used where homogenizing, dispersing, suspending, emulsifying, dissolving are required. Its advantages compared with a conventional agitator are free of aeration, no floating powder, no sedimentation, no additional baffles, no flow dead zones, and very high efficient that a small motor can keep large volumes in motion.
HOW IT WORKS?
PerMix PJ series Jet Steam Mixer functions with its special designed stator/rotor system. The rotor is usually a turbine impeller, and the stator is a curved guide tube surrounding the rotor. When it works, the rotor generates a strong axial flow from the surface of the liquid, going through the stator tube and towards the bottom. In this manner, floating powder is drawn into the liquid, and sedimentation is lifted up. With many circulations, the total tank can be mixed and homogenized without dead zones.
TWO TYPES OF JET STEAM MIXER:
There are two types of PerMix PJ series Jet Steam Mixer available, and the difference lies in the stator (as shown in left picture). The stator can be either with or without openings.
PerMix PJ series Jet Steam Mixer with a stator without openings has a stronger axial flow, because all the materials will go through the tube from the top to the bottom. But for the PJ series Jet Steam Mixer with a stator with openings, some of the materials will go out of the tube through the openings. This makes it have some homogenizing ability.
INSTALLATION:
PerMix PJ series Jet Steam Mixers work in batch operation. Similar to Batch Shear Mixers, its installation is flexible enough for it to be fitted into any existing system:
- Top entry (open or closed vessel)
- Side entry
- Bottom entry
APPLICATIONS:
PerMix PJ series Jet Steam Mixers can be used in almost all branches of processing in the chemical industry, pharmaceutical productions, food industry and cosmetic products.
- Food & Beverage
Milk powder dissolving, Salad dressing, Mayonnaise, Premix for ice cream, Cheese, Yogurt, Fruit juice
- Cosmetics & Daily Care
Detergent, Body gel, Shampoo, Cream, Lotion, Tooth paste, Soap
- Pharmaceutics & Biology
Drug synthesis, Vaccine, Fat emulsion, Injectable suspension, Veterinary medicine
N type, Jet Agitator:
| Model |
Watts, kW |
RPM, @50Hz |
Max. Capacity, L |
Shaft Length, mm |
| @1 cPs |
@3,000 cPs |
| PJ-C/90-N |
1.1-1.5 |
3,000 |
1,500 |
500 |
400-1,000 |
| PJ-C/110-N |
2.2-3 |
3,000 |
3,000 |
1,000 |
750-1,500 |
| PJ-C/145-N |
4-5.5 |
3,000 |
5,000 |
1,700 |
900-1,700 |
| PJ-C/215-N |
7.5-11 |
1,500 |
10,000 |
3,300 |
1,200-2,300 |
| PJ-C/245-N |
15-18.5 |
1,500 |
18,000 |
6,000 |
1,200-2,300 |
| PJ-C/275-N |
22-30 |
1,500 |
30,000 |
10,000 |
1,400-2,500 |
| PJ-C/345-N |
37-55 |
1,000 |
50,000 |
17,000 |
1,500-2,700 |
O type, Jet Disperser:
| Model |
Watts, kW |
RPM, @50Hz |
Max. Capacity, L |
Shaft Length, mm |
| @1 cPs |
@3,000 cPs |
| PJ-C/090-O |
1.5 |
3,000 |
100 |
50 |
350 |
| PJ-C/100-O |
2.2 |
300 |
150 |
600 |
| PJ-C/120-O |
4 |
800 |
400 |
700 |
| PJ-C/140-O |
7.5 |
2,000 |
1,000 |
800 |
| PJ-C/160-O |
11 |
3,000 |
1,500 |
820 |
| PJ-C/180-O |
18.5 |
4,000 |
2,000 |
1,100 |
| PJ-C/200-O |
22 |
1,500 |
5,000 |
2,500 |
1,150 |
| PJ-C/220-O |
30 |
7,000 |
3,500 |
1,200 |
| PJ-C/240-O |
37 |
12,000 |
6,000 |
1,300 |
| PJ-C/270-O |
55 |
20,000 |
10,000 |
1,350 |
| PJ-C/290-O |
75 |
24,000 |
12,000 |
1,550 |
| PJ-C/300-O |
90 |
30,000 |
15,000 |
1,600 |
| PJ-C/320-O |
110 |
1,000 |
34,000 |
17,000 |
1,650 |
| PJ-C/350-O |
132 |
36,000 |
18,000 |
1,900 |
1. Actual liquid capacity will vary depending on the liquid type and viscosity.
2. PerMix offers customized capacity according to customer requests.
3. PerMix reserves the right to modify the design without notice.
Q: What is your price level compared with European suppliers and local Chinese suppliers?
A: Depending on the machine type and size, our price level is 30%-60% less than the European suppliers and 5-15% higher than the big local suppliers.
Q: Are you able to provide tailor-made design and production for the mixers?
A: Yes, in fact more than half of our mixers are tailor made, which is one of our strong points.
Q: Are you able to design and produce other processing equipment?
A: We are open to discuss about it.
Q: Can you provide machines to OEM customers, meaning to label their brands on the machines.
A: Yes we are doing it a lot. We have several OEM partners in the USA.
Q: Do you have agent network out of China?
A: Yes we do have agents but only in some countries, for example in USA, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are still looking for more agents because we believe to work with agents is the best way to do business.
Q: What is your delivery lead time of the mixing equipment.
A: Depending on the size and level of customization, but usually it is from 6-14 weeks.
Q: How do you pack and ship the mixing machines?
A: For machines don't require full container loading, we will pack them in wooden case. For FCL (full container loading) shipment, we will just wrap the machines in plastic films and fix them in the container. The shipment can be either by air or by sea
Audited Supplier 
){kind=link}